WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

Spherical plain bearing is widely applied in engineering, hydraulic oil cylinder metalforming machine, engineering machinery, automation equipment, automotive shock absorber, hydraulic machinery industry etc. spherical plain bearing profile and classification of spherical plain bearing is spherical sliding bearing, basic is by sliding surface contact with spherical surface of the inner and outer. According to its structure and types of different, can bear radial load and axial load, radial, axial or is the effect and combined load. Because of the [spherical bearings]  spherical sliding large contact area, dip Angle, also because most of the spherical plain bearing special processing methods, such as surface phosphating, galvanization, chrome or sliding surface and lining mat, spraying, etc. So have bigger load capacity and impact resistance ability, and have corrosion resistance and wear, self-aligning and lubrication good or lubricated non-lubricated dirt, dislocation even also can work normally. Therefore, thespherical plain bearingsare widely used in low speed of swing motion, tilt movement and rotation.

Import spherical bearings , such as SB type, type, GE, CF series, and the amount and type of other types of the joint bearings and fixed-end joint bearings, etc.

SKF GE-45-ES-2RS spherical bearings  requiring maintenance have the sliding contact surface combination steel-on-steel. SKF bearings with this sliding contact surface combination require regular relubrication. The high wear resistance of the sliding surfaces makes these bearings especially suitable for bearing arrangements where heavy loads of alternating direction, shock loads or heavy static loads have to be accommodated. 

spherical ina bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface,which enables it to tolerate large load.According to their types and configuration,it can tolerate axle and radial load as well as conbined axle and radial load.Since it has composite material on the outer sphere of the inner ring,thus it can produce self-lubricating during work. 

Self-lubricating spherical plain bearing applies in water conservancy,specialized mechinery and other industries.Because of the large sphere slidinig contact area and tilt angle of the plain fag bearing ,as well as most of the spherical bearings take special craft treatment,such as surface phosphating, galvanization,chromate treatment,and inlaid mats, spray coating and so on,thus, it has larger load capacity and anti-force capability,as well as anti-corrosion,wear resistant,sel-aligning and self-lubricating features.They can work normally even if it installed mismatch. Therefore,spherical plain bearing are widely used in low-speed swing motion,tilt and rotation movement.

MB14

MB15

MB17